1. What is the application of geological knowledge to engineering projects called?
(A) Economic Geology
(B) Marine Geology
(C) Historical Geology
(D) Engineering Geology
2. Engineering geology is primarily concerned with the interaction between:
(A) Geological conditions and engineering structures
(B) Oceans and atmosphere
(C) Plants and animals
(D) Minerals and fossils
3. Which geological material is generally considered the strongest for supporting heavy structures when it is fresh and competent?
(A) Loose sand
(B) Soft clay
(C) Sound bedrock
(D) Organic soil
4. The ability of soil or rock to support the load of a structure without excessive failure is called:
(A) Porosity
(B) Bearing capacity
(C) Permeability
(D) Plasticity
5. Which property describes the percentage of void space within a rock or soil?
(A) Density
(B) Porosity
(C) Hardness
(D) Cohesion
6. The ability of a rock or soil to allow water to pass through it is known as:
(A) Porosity
(B) Permeability
(C) Plasticity
(D) Elasticity
7. Which type of rock generally has high primary porosity?
(A) Massive granite
(B) Well-sorted sandstone
(C) Marble
(D) Slate
8. Joints in a rock mass are:
(A) Mineral grains
(B) Layers of sediment
(C) Fossils
(D) Natural fractures along which there has been little or no displacement
9. A fault is a geological structure characterized by:
(A) No fracture
(B) Only mineral growth
(C) Fracture accompanied by displacement
(D) Deposition of sediments
10. Why are faults important in engineering geology?
(A) They always increase rock strength
(B) They may create zones of weakness and instability
(C) They prevent groundwater movement
(D) They eliminate weathering
11. Which geological investigation is commonly carried out before construction of a major dam?
(A) Oceanographic survey only
(B) Fossil collection only
(C) Meteorological observation only
(D) Geological mapping and subsurface investigation
12. The main purpose of a site investigation is to determine:
(A) Geological and geotechnical conditions at a construction site
(B) The age of the Earth
(C) The number of fossils in the region
(D) The color of minerals
13. Which method is commonly used to obtain subsurface information by drilling?
(A) River gauging
(B) Borehole drilling
(C) Weather forecasting
(D) Fossil dating
14. A core sample obtained during drilling provides information about:
(A) Atmospheric pressure only
(B) Subsurface rock and soil conditions
(C) Ocean currents
(D) Surface temperature only
15. Which instrument is commonly used to measure groundwater levels in a borehole?
(A) Thermometer
(B) Water-level meter
(C) Barometer
(D) Seismograph
16. Which type of geological hazard is associated with the sudden movement of Earth's crust?
(A) Soil formation
(B) Weathering
(C) Earthquake
(D) Sedimentation
17. Which seismic wave generally travels fastest through the Earth?
(A) S-wave
(B) Love wave
(C) Surface wave
(D) P-wave
18. Which seismic waves cannot travel through liquids?
(A) S-waves
(B) P-waves
(C) Sound waves
(D) Primary waves
19. Landslides are primarily associated with:
(A) Downslope movement of earth materials
(B) Upward movement of magma only
(C) Ocean currents
(D) Fossil formation
20. Which factor can significantly increase the likelihood of a landslide?
(A) Heavy rainfall
(B) Reduced slope angle
(C) Strong intact bedrock
(D) Dense vegetation in all cases
21. Which type of slope failure involves the downward movement of a relatively coherent mass along a curved surface?
(A) Rockfall
(B) Rotational slide
(C) Mudflow
(D) Soil creep
22. Which geological condition is generally favorable for groundwater storage?
(A) Completely compacted clay
(B) Massive impermeable rock only
(C) Highly porous and permeable rock
(D) Unfractured crystalline rock only
23. An aquifer is a geological formation that:
(A) Contains only petroleum
(B) Prevents all groundwater movement
(C) Stores and transmits significant quantities of groundwater
(D) Is always composed of granite
24. Which material generally has very low permeability?
(A) Gravel
(B) Clay
(C) Coarse sand
(D) Fractured limestone
25. Which geological structure can act as a pathway for groundwater movement?
(A) Open fracture
(B) Massive unfractured rock
(C) Impermeable clay layer only
(D) Solid mineral grain
26. In dam construction, a major geological concern is:
(A) Soil color only
(B) Fossil color
(C) Atmospheric humidity only
(D) Foundation stability and seepage
27. Which type of rock is generally most susceptible to dissolution and development of caves?
(A) Gneiss
(B) Granite
(C) Basalt
(D) Limestone
28. Why is weathering important in engineering geology?
(A) It can reduce the strength and durability of rocks
(B) It always increases rock strength
(C) It prevents slope failure
(D) It eliminates groundwater
29. Which property is particularly important when evaluating rock as a construction material?
(A) Rock color only
(B) Fossil abundance
(C) Geological age only
(D) Rock strength
30. Engineering geological maps are mainly prepared to:
(A) Show geological conditions relevant to engineering projects
(B) Identify only fossil locations
(C) Measure atmospheric pressure
(D) Record animal populations