1. The ratio of height to length of an arrowhead in dimensioning is
(A) 1:3
(B) 1:2
(C) 1:4
(D) 1:1.5
2. The “ ” symbol is
(A) Radius
(B) Depth
(C) Diameter
(D) Angle
3. Which is the wrong statement regarding dimensions?
(A) Every dimension should be written to the left side of the drawing
(B) Every dimension must be given, but none should be given more than once
(C) Dimensions should be placed outside the views
(D) A centre line should not be used as a dimension line
4. Size or functional dimensions do not indicate
(A) Position
(B) Radius
(C) Depth
(D) Thickness
5. In which of the following type of dimensioning, the dimensions are arranged only in a straight line?
(A) Parallel dimension
(B) Chain Dimension
(C) Combined dimension
(D) Aligned dimension
6. In dimensioning, the lines enclosing the dimension line are known as
(A) Leader line
(B) Extension line
(C) Dimension line
(D) Outline
7. While dimensioning a circle, the leader line and the dimension line are drawn at which angle with respect to each other?
(A) 45˚
(B) 0˚ or 180˚
(C) 30˚
(D) 90˚
8. Dimensioning doesn’t represent
(A) Height
(B) Material
(C) Depth
(D) Length
9. Which are the two systems of placing dimensions? i. Aligned system, ii. Break system, iii. Unidirectional system, iv. Directional system
(A) i, iii
(B) i, ii
(C) ii, iv
(D) i, iv
10. Which type of line is used to join the dimension line and the curve that needs to be dimensioned?
(A) Outline
(B) Leader line
(C) Dimension line
(D) Section line